
中國製造業首富何享健先生曾說:成功無法複製、失敗可以避免。迎戰職場,想取得先機學習軟體資訊、武裝硬體設備嗎?金仲達教授提供嵌入式系統概論專業課程飛奔進入NTHU OCW網站,update自己,不落人後!The wealthiest person in China manufacturing industry Xiangjian He once said “ We can’t duplicate success, but we can avoid failure.” Do you want to be ahead of others by learning some knowledge about software and hardware?
【Lectures】
1. | Outline |
2. | Embedded software development |
3. | Introduction to MSP430 |
4. | Timers and clocks |
5. | MSP430 instruction set architecture |
6. | Interrupt |
7. | Analog-to-digital conversion |
8. | Optimization |
9. | Linux basics |
10. | Makefile |
【Labs】
Lab 1: | LaunchPad and setup |
Lab 2: | Clock system |
Lab 3: | Timer and interrupt |
Lab 4: | Analog-to-digital converter |
Lab 5: | Serial communication |
Lab 6: | Low-power optimization |
Lab 7: | Development board setup and cross-compiling |
Lab 8: | Boot-loader |
Lab 9: | Non-OS embedded application |
Lab 10: | Linux kernel and root file system |
Lab 11: | Kernel modules and drivers |
Lab 12: | Communication between LaunchPad and development board |
【參考書籍】
References
1. | David E. Simon, An Embedded Software Primer, Addison Wesley, 1999. |
2. | Wayne Wolf,Computers as Components: Principles of Embedded Computing |
System Design, Morgan Kaufmann, 2001. | |
3. | Peter Marwedel, Embedded System Design, 2nd edition, Springer, 2006. |
This course is to introduce the basic concepts on electromagnetics, covering topics of transmission line, electrostatics, magnetostatics, time-varying field, plane waves etc. To be consistent with the modern trend of electrical engineering
General Information
This course is to introduce the basic concepts on electromagnetics, covering topics of transmission line, electrostatics, magnetostatics, time-varying field, plane waves etc. To be consistent with the modern trend of electrical engineering, I bring forward the transmission line to the beginning of the lecture. The content of transmission line is mostly adopted from the textbook by Ulaby. However, the same concepts are also given in the textbook by Cheng. This course will be lectured mostly in English and slightly in Chinese for clarity.
Textbook
* | David K.Cheng, Field and Wave Electromagnetics 2nd Ed., |
Addison Wesley,1989. |
* | Fawwaz T.Ulaby, Fundamentals of Applied Electromagnetics 6th Ed, |
♠ | Vector Mechanics for Engineers - Dynamics |
by Beer, Johnston, Jr. and Clausen 9th Ed in SI Units |
♠ | Engineering Mechanics - Dynamics by Meriam and Kraige |
♠ |
1 | Kinematics of Particles |
2 | Kinetics of Particles: Newton's Second Law |
3 | Kinetics of Particles: Energy and Momentum Method |
4 | System of Particles |
5 | Kinematics of Rigid Bodies |
6 | Plane Motion of Rigid Bodies: Forces and Accelerartion |
7 | Plane Motion of Rigid Bodies: Energy and Momentum Methods |
【課程說明】
Course Description
核工原理為核工領域入門課程,不論是電廠核工 (Nuclear Power Plant Engineering)或輻射應用(Radiological Science and Technology)都應修此課程。課程內容包括:原子核物理導論、原子核之分裂反應、放射元素之衰變、輻射(中子、光子、帶電粒子)與物質作用、中子擴散理論、核反應器之中子能譜、核反應器之臨界計算。如時間允許,會安排參觀北部的核能電廠。
The principle of Nuclear Engineering is an introductory course to Nuclear Engineering. Whether you are going to study on Nuclear Power Plant Engineering or Radiological Science and Technology, this course is required.The course contents include: Introduction to nuclear physics, nuclear fission reaction,radioactive decay , radiation (neutrons, photons, charged particles) effects on materials, neutron diffusion theory, neutron spectroscopy of reactor, critical calculations of nuclear reaction.If time permits, we will arrange to visit the nuclear power plants in Northern Taiwan.
【指定用書】
Text Books
♠ John R.Lamarsh,Introduction to Nuclear Engineering. 3rd Edition,
Prentice Hall, 2001.
【參考書籍】 References |
♠ K. Almenas & R. Lee, “ Nuclear Engineering- an Introduction”, Springer- Verlag,1992. |
♠ J. Kenneth Shultis, Richard E. Faw, "Fundamentals of Nuclear Science and Engineering”, 2nd Edition, CRC Press, 2008 |
【教學方式】
Teaching Method
♠ 教室教學,版書。極少部分內容會用投影片。
【教學進度】 Syllabus | |
Background and General Introduction (3 hours) | |
Chapter 2: | Atomic and Nuclear Physics (9 hours, H.W. #1, #2) |
Chapter 3: | Interaction of Radiation with Matter (9 hours, H.W. #3, #4) |
Chapter 4: | Nuclear Reactors and Nuclear Power (5 hours, H.W. #5) |
Chapter 5: | Neutron Diffusion and Moderation (10 hours, H.W. #6, #7) |
Chapter 6: | Nuclear Reactor Theory (12 hours, H.W. #8, #9) |
【成績考核】
Evaluation
♠ 成績考核的內容包括:期中考、期末考、隨堂小考以及作業五項。
♠ 期中考(30%)、期末考(45%)、隨堂小考(10%)、作業(15%)
♠ 未修過 ESS200900 核工導論 的同學亦可選本課程
中國製造業首富何享健先生曾說:成功無法複製、失敗可以避免。迎戰職場,想取得先機學習軟體資訊、武裝硬體設備嗎?黃婷婷教授提供計算機結構專業課程!
【課程說明】 | |
To understand how a computer system work. Emphasis will be placed on | |
1. | What characterizes the performance of a computer |
2. | Instruction set design and its interaction with compiler |
3. | Basic building blocks: I/O, Memory, Datapath, Control |
4. | Pipelined datapath |
【指定用書】 |
P.A.Patterson and J.L. Hennessy, Computer Organization and Design: |
The Hardway/Software Interface, fourth Ed., Morgan Kauffmann, 2010. |
【教學進度】 | |
Course outlines | |
1 | Computer abstractions and technology |
2 | The role of performance |
3 | Instructions:language of the machine |
4 | Arithmetic for computers |
5 | The processor: datapath and control |
6 | Enhancing performance with pipelining |
7 | Large and fast: exploiting memory hierarchy |
8 | Interfacing processors and peripherals |
♠ | Introduce three basic processes of heat transfer and relevant applications |
♠ | Incropera, F. P., Dewitt,D. P., Bergmann, T.L., and Lavine, A.S., |
Fundamentals of Heat and Mass Transfer, (6th ed., 2007) |
【教學進度】
Syllabus
♠ PART I | Chapter 1 Introduction |
| Chapter 2 Introduction to Conduction |
Chapter 3 One-Dimensional, Steady-State Conduction | |
Chapter 4 Two-Dimensional, Steady-State Conduction | |
Chapter 5 Transient Conduction | |
♠ PART II | Chapter 6 Introduction to Convection |
Chapter 7 External Flow | |
Chapter 9 Free Convection | |
♠ PART III | Chapter 12 Radiation: Processes and Properties |
♠ Final Exam | |
張智星教授獨門的MATLAB知識,像是能夠用旋律分辨音樂的語音辨識程式等,幫您更新資訊科技發展的最新進度!智星教授在此遞上邀請函,邀請您參加華麗的【科學計算】舞會!笑臉迎人、帥氣逼人的張智星教授,在MATLAB的舞會現場等著你的到來!Welcome to Professor Jyh-Shing Roger Jang’s MATLAB world. Getting to know the latest development in computer science. Scientific Computing course teaches you how to distinguish music only with rhythm.
♠ | Calculus, Linear algebra |
♠ | MATLAB程式設計【進階篇】 by Roger Jang |
MATLAB Programming【Beginner】 by Roger Jang | |
♠ | Experiments with MATLAB by Cleve Moler |
♠ | Numerical computing with MATLAB by Cleve Moler |
♠ |
♠ | 本課程為為兩學期的課程,應用力學一級二。 |
♠ | 本課程為固體力學之基礎,包含靜力學及動力學,以質點或剛體探討靜力平衡問 |
題及運動現象。內容詳見所附資料。 | |
♠ | This course is a two-semester sequence Applied Mechanics (I) and Applied Mechanics (II) |
This course is the basis of solid mechanics, including statics and dynamics, which explores the problem of static equilibrium and motion with particles and rigid bodies. The contents of the enclosed information. |
♠ | Vector Mechanics for Engineers-Statics |
♠ | Vector Mechanics for Engineers-Dynamics |
by Beer, Johnston, Jr., Mazurek and Eisenberg 9th Ed. in SI Units (2010) |
♠ | 上課講解,作業,助教晚上協助學生解答疑問。 |
♠ | 上課時並以口頭問答方式了解學生學習情況。 |
♠ | Lecture, assignments, and after-class review by teaching assistants. |
| Teacher may interact with students by giving oral questions in the class to acquire their learning progress. |
靜力學及動力學共18章,上學期應用力學一會上完靜力學10章及動力學11及12章,平均分配於整個學期,兩次期中考及一次期末考,另有不定期平常考。講授內容如下︰ | |
There are 18 chapters for Statics and Dynamics in total. In the first semester, the course will cover the whole part of Statics (Ch.1~Ch.10) and two chapters of Dynamics (Ch.11, Ch,12). There will be two midterms, a final, as well as random quizzes. The course outline is as follows: | |
1 | Introduction |
2 | Statics of Particles |
3 | Rigid Bodies : Equivalent System of Forces |
4 | Equilibrium of Rigid Bodies |
5 | Distributed Forces : Centroids and Centers of Gravity |
6 | Analysis of Structures |
7 | Forces in Beams and Cables |
8 | Friction |
9 | Distributed Forces : Moments of Inertia |
10 | Method of Virtual Work |
11 | Kinematics of Particles |
12 | Kinetics of Particles : Newton’s Second Law |
♠ | Richard Wolfson, "Nuclear choice, a Citizen Guide to Nuclear Technology,", |
The MIT Press, 1993 | |
♠ | 李敏、黃四昌”核能電廠安全及輻射防護” |
Li,Min, Huang,Si-Chang “ the Security of Nuclear Power Plant and Radiation Protection” | |
♠ | 科學月刊 2011 二月號, 四月號, 五月號 數篇介紹核能,日本福島核子事故的文章 |
Science Monthly, 2011 February, April, May several articles about nuclear and the accident of Japan Fukushima nuclear disaster |
♠ | 課堂講授,問題討論及電廠參觀 |
Knowledge teaching, questions discussion, and invitation to electric power plant (unsure schedule). |
♠ | 能源 4小時Nuclear Power 4hrs | ||||
♠ | 核能發電基本知識介紹 10小時 | ||||
Introduction of Basic Knowledge about Nuclear Power 10hrs | |||||
♠ | 核能發電簡史與現況A Brief History and Status of Nuclear Power | ||||
♠ | 核能發電原理 Theory of Nuclear Power | ||||
♠ | 核電廠安全設計Security Design of Nuclear Power Plant | ||||
♠ | 重大核電廠事故回顧The Major Accidents of Nuclear Power Plants | ||||
♠ | 輻射與輻射防護 8小時Radiation and Radiation Protection 8hrs | ||||
♠ | 輻射與物質作用Radiation and Material Effects | ||||
♠ | 輻射劑量與生物效應Radiation Dose and Biological Effects | ||||
♠ | 重大輻射安全事件回顧The Major Events of Radiation Security | ||||
♠ | 核廢料 4小時Nuclear Waste 4hrs | ||||
♠ | 低階核廢棄物Low-level Nuclear Waste | ||||
♠ | 使用過核燃料與高階核廢棄物Used Nuclear Fuel and High-level Nuclear Waste | ||||
♠ | 核能發電爭議 4 小時 Controversy over Nuclear Power 4hrs | ||||
♠ |
期初報告內容為觀看Midterm Report Videos: | ||||
| http://www.youtube.com/watch?v=7om7cNI_i2w&feature=relmfu http://pnn.pts.org.tw/main/?p=25573 | ||||
♠ | 錄影帶後的評論與感想,同學亦可以其他同類型的錄影帶替代, | ||||
| 但必須於報告中註明錄影帶的網址。期初報告的目的為讓學生了解核電爭議的源頭。期初報告未交者,建議退選。 | ||||
♠ | 期末報告為對核能相關議題的探討。 | ||||
| Final papers is the exploration/discussion about nuclear-related issues. |
賴志煌教授的課程備有各式學習資源:指定閱讀原文書,培養學生的英文閱讀及理解能力;作業習題的練習,保持學生的數學及物理推導能力;熱心助人的助教,提供學生專業且大量的解題技巧。
Professor Lai provides you multiple learning resources to refine your ability in Quantum Physics. Enhance your reading ability and comprehension with the English textbook; Cultivate your math and physics logics with homework; Refine the problem solving skills with enthusiastic TA.
【課程大綱】
Course Outline
本課程以材料的觀點介紹量子理論的入門課程,主要以現象介紹為主、數學為輔。讓同學了解量子的概念、理論與實際運用,並對相關的物理現象做概念性的整體介紹。
This is an introductory courses on quantum theory. Mainly focusing on introducing the main phenomena, supplemented by mathematics. Besides, making conceptual introduction to related physical phenomena.
【指定與參考用書】
Text Books / Reference
【教學方式與進度】
Teaching Method / Syllabus
♠ | 以上課講授為主。 |
Lectures in class | |
♠ | Concepts of Modern Physics Beiser(Mcgraw - Hill) |
以指定用書的Ch1 to Ch10 為主要內容。 | |
Mainly related to Ch1to Ch10 in the required book. |